PROLIGHTS Barre LED EclCyc 100 pour cyclorama 330 W RGB+WW 80 x 40 ° 1 m (PROLIGHTS EclCyc 100 LED bar for cyclorama 330 W RGB

Reference: ML-CR-401

You will get free shipping when cart value exceed of €700.00 Tax excl. with the carrier all, to a delivery address in France.
  Shipping Policy

Shipping within 24 to 48 hours then delivery within 24 to 72 hours (if the product is In Stock)

  Return policy

Return under conditions


EclCyclorama 100 LED bar

EclCyclorama are extremely discreet LED bars (less than 12 cm high) specially designed for cyclo lighting or for wash down use. They are equipped with custom RGB + white LEDs offering very high colorimetric qualities (high CRI, TLCI, TM30). They feature Spektra calibration for color consistency between different projectors, ensuring identical rendering in the same CIE1931 color space. Their wide-aperture, asymmetrical optics enable them to illuminate very large areas of cyclo, without having to glue 2 bars together to achieve uniform illumination (spacing up to 3 m). They can be controlled by manual, DMX RDM, wireless DMX (W-DMX), sACN or Art-Net.
Their extremely quiet convection cooling opens the doors to theaters, TV studios, cinemas, auditoriums, etc.
A wide range of optional accessories are available.
EclCyclorama are available in 50 cm ( ML402 ) and 100 cm.

SOURCE
- 330 W custom RGB + warm white LED source
- CCT variable from 2,800 to 6,500 K
- CRI: > 93 (@ 3,200 K) / > 92.6 (@ 5,600 K)
- R9: > 88 (@ 3,200 K) / > 93.7 (@ 5,600 K)
- TLCI : > 91 (@ 5,600 K)
- TM30 Rf/Rg: 89.8/106 (@ 5,600 K)
- Luminous flux: 27,342 lumens (80 x 40 °)
- Illuminance, with positioning at 1 m from cyclo and 1.5 m height:
1,240 lux @ 1.80 m @ 80 x 40 °
2,610 lux @ 1.80 m @ 40 °
3,110 lux @ 1.80 m @ 10 x 60 °
2,880 lux @ 1.80 m @ 30 x 60 °
- LED lifetime: > 50,000 h

OPTICAL SYSTEM
- Diffusing angle (with filter included): 80 x 40 ° (H x V)
- Other optional diffusing filters: 40 °, 10 x 60 ° and 30 x 60 °
- Optional barn doors

COLORS
- Color mix: RGB + warm white
- 16-bit color control
- Virtual color wheel with presets
- Amber Shift mode enabling tungsten emulation (CCT 3,200 K to amber)
- Green / Magenta level adjustment
- White presets: 2,800 to 6,500 K
- Linear virtual CTO applicable to any color
- Linear transfer from white to any color

DYNAMIC EFFECTS
- Manual mode: adjustment of R, G, B and W levels
- Static mode: selection of a pre-programmed static color
- Auto mode: execution of internal programs with speed adjustment

CONTROL
- Control protocols: DMX RDM, Art-Net, sACN, W-DMX
- DMX circuits: 1 / 2 / 4 / 5 / 6 / 10 / 15 / 17
- Integrated W-DMX receiver with folding antenna for wireless DMX control
- RDM for visualization and parameter setting
- Graphic display
- Battery-powered display for offline parameter setting
- Master / Slave function
- Firmware update via optional UPBOX1U box

ELECTRONICS
- Linear dimmer 0 to 100% in 16-bit
- 4 dimming curves
- Electronic strobe with variable speed from 1 to 30 Hz
- No flicker when capturing video (flicker-free)
- PWM frequency adjustment: 600 Hz to 25 kHz

ELECTRICAL
- Power supply: 100-240 VAC, 50/60 Hz
- Power consumption: 400 W
- Power factor: > 0.94

PHYSICAL DATA
- Extruded aluminum body
- Black finish
- Manual Tilt adjustment: +/- 8 °
- Lyre with pole control and optional swivel hanging lyre
- Silent convection cooling
- Power connectors: powerCON TRUE1 In / Out compatible sockets
- DMX connectors: Amphenol 5-point In/Out sockets
- Network connections: 2 RJ45 sockets
- Rating: IP20
- Operating temperature: -10 to 45°C
- Dimensions: 1,000 x 119 x 148 mm
- Weight: 9.6 kg
DELIVERED WITH
- Diffusing filter 80 x 40 °
- 2 Omega ¼-turn turntables
- Power cable (without mains plug)

PROLIGHTS
ML-CR-401

Specific References

7 other products in the same category: